The way toward shading, by applying texture colors to free fiber, string and texture are called texture coloring. Being done for millennia, it has tested from multiple points of view until the present time, and great outcomes have been gotten. Right now, Viktoria Fabric Dyes, which is one of the greatest brandmarks of texture coloring, recommends 3 distinct styles of it. These are; Bucket or Sink Method, Boiling Method and Washing-Machine Method. These techniques will be clarified in the accompanying sections.
I. Pail or Sink Method
• This texture coloring strategy is done by filling a can or a huge compartment with water or impeding the channel of the sink; in order to fill it with water.
• If the activity is completed some place out of the sink; the cover ought to be spread so as not the water to stream out.
• Before beginning this texture coloring activity, the sink or the slug ought to be loaded up with 60 C heated water, as the specialists prompt, and the powder texture color ought to be broken down with high temp water in another compartment.
• If the tone is too light, somewhat more color ought to be added, however in the event that it is too dull boiling water ought to be added.
• The broke down color ought to be poured to where the water is and ought to be blended for some time.
• After being gotten free from the entirety of its stains, the item to be colored is put where the color is, by being wet, and water and the color are mixed for 10 minutes, without offering a reprieve.
• The texture that is kept in the water for at any rate thirty minutes and generally for 60 minutes, is removed from the water when concluded that it has the normal tone.
• Just subsequent to coloring, Fiske texture color stabilizer is applied as per the guidelines.
• You should then flush the colored texture with cold water. After this, wash your texture with warm water and a delicate cleanser; flush it and dry it. Subsequent to getting dried, your texture will have the normal tone.
II. Bubbling Method
Bubbling is another strategy utilized for texture coloring.
• A huge pot in which texture can move effectively is loaded up with water and this pot is put on the cookstove. The cookstove is turned on and when the water starts heating up the color is added into the water.
• The item to be colored is wetted and tossed into the water.
• The item to be colored is put where the color is, by wetting; subsequent to being cleaned of every one of its stains. It is mixed in the initial 10 minutes without offering a reprieve.
• After this progression, flush the colored texture with cold water. At that point, wash your texture with warm water and delicate cleanser, flush and dry it. Subsequent to drying, your texture will have the normal tone.
III. Clothes washer Method
You can without much of a stretch color your texture with clothes washer texture coloring strategy.
• The temperature level of the clothes washer ought to be fixed at the most significant level. Additionally, the time setting ought to be fixed such that the machine will work in any event 30 minutes.
• The texture color is liquefied totally by mixing it with heated water in a plastic pot. In it, 1 teaspoon of cleaning up fluid is added.
• In another pot; if cotton or material is being colored, salt ought to be broken up in 4 glasses of boiling water; and if silk or nylon is being colored, some vinegar and 2-4 glasses of high temp water ought to be blended(mixed( together.
• Firstly the color, and from that point onward, the vinegar and salt are spilt into the cleanser box of the clothes washer and it ought to be turned on.
• After the machine stops, the colored texture is washed once again with warm water and it gets prepared to utilize.
Viktoria has been fabricating texture color more than 100 years for you. There is no requirement for the workshop, extra hardware, follow-up and time on account of Viktoria Fabric Dyes. Since the Viktoria Dye has been planned and grown in like manner.
